Floral Wall Setup
Ensuring a seamless setup of your greenery wall backdrop is essential for creating the perfect atmosphere. To assist you, please follow the instructions below carefully. If you have any questions or need further guidance regarding the setup of your backdrop, please don't hesitate to reach out. We're here to help!
Before you start
Please allocate 30 - 45 minutes for assembly. We strongly advise that assembly is carried out by a minimum of two individuals. Dismantling the floral wall typically takes around 30 minutes.
Pick Up Details
Your greenery wall package includes essential components for easy setup: a bag for the stand (5ft long, flat), two base weights (1.5ft long, wide, and flat), and two rolls of lush greenery / florals (each 4.5ft long, 1ft wide). Rolling the greenery / florals this way and packaging it back up as received is crucial for future use. Additionally, you'll find a 6ft bag provided to hold the greenery / florals rolls.
Step 1
Place bases for the stand approximately 7.5 ft apart.
Step 2
Locate the two poles with a connection indent and place them on top of the feet with the connection indent facing upward.
Step 3
Locate the two poles with the cross bar holes located at the top and place them on top of the connection indent pole noted in step 2.
Check In
At this point you should have two pieces that look similar to the photo noted here. They should be roughly 8ft apart.
Step 4
Build the crossbar: The final 2 poles will be used as the crossbar that goes across the two pieces you've put together thus far. The crossbar should have two clips shown to the left and those should be on the outside for attaching to the pieces you'd created.
Step 5
Ensure the crossbar is roughly 7.5ft long by ensuring you've latched the button clips in the second hole opening, not the first hole opening.
Step 6
Lay your crossbar to the side, and let's now assemble the floral wall.
Lay your two halves of floral wall out and align them to mock up the floral wall while it's on the ground. You will lay both pieces of floral wall side by side in a vertical position & the Velcro should be in the center of the 8ft wall.
Step 7
Once the floral wall pieces have been connected, grab your cross bar and route the crossbar through the TOP cloth tunnel of the floral wall.
Step 8
Once the floral wall has fully been connect with the cross bar routed through the top, the sides of the floral wall tied to the side bars, the wall is ready to be stood up with two individuals.
Step 9
Stand the wall up with two individuals.
Step 10
Place the two base weights on each foot and straighten out the wall however you need to.
Complete!
& you're finished! Now it's time to enjoy.
